1. Turn the function on/off
The "CC" function is activated by pressing the "CC" key. The indicator on the control panel will turn on
yellow, indicating that the function is enabled. Pressing the "CC" key again will turn off the "CC" function, and the indicator on the control panel will turn off , and the LCD display of the set vehicle speed will turn off.
2. Activating the function with speed setting
When the "KK" function is enabled, you need to press the accelerator pedal to reach the desired vehicle speed. After reaching the desired vehicle speed, you can press the "Set+" (or "Set-") key to fix the vehicle speed if the following conditions are met:
- the vehicle speed must be greater than (or equal to) 40 km/h and less than (or equal to) 150 km/h;
- engine speed not lower than 1200 rpm and not higher than 5500 rpm;
- the gear of the gearbox must not be lower than third (for manual transmission).
The "KK" function is activated and the indicator on the control panel will turn on
green, indicating that the function is activated, and the LCD will display the set speed of the vehicle. Once the accelerator pedal is released, the vehicle will maintain the selected speed.
If the activation conditions are not met, the yellow indicator
on the control panel it will flash for 5 seconds, then light up again continuously. The "KK" function is not activated in this case.
3. Changing the set speed of the vehicle with the "KK" function activated
Pressing the "Set+" button once will increase the set vehicle speed by 1 km/h. The LCD will display updated information about the selected vehicle speed.
Pressing the "Set-" key once will cause the set vehicle speed to decrease by 1 km/h. The LCD will display updated information about the selected vehicle speed.
Long press (more than 0.5 seconds) the "Set+" key will cause the vehicle's set speed to increase until the key is released.
The LCD will display updated information about the selected vehicle speed.
Long press (more than 0.5 seconds) the "Set-" key will cause the vehicle's set speed to decrease until the key is released.
The LCD will display updated information about the selected vehicle speed.
With one long press of the "Set+" (or "Set-") button, the change in the set vehicle speed will not exceed 30 km/h.
Pressing the accelerator pedal will cause the vehicle to increase its speed even if the "CC" function is activated. After releasing the accelerator pedal, the vehicle will reduce its speed to the set speed and maintain it.
4. Resumption, deactivation of the function
Article copied from a web page ladaman.ru
When pressing the brake pedal, long pressing (more than 5 seconds) clutch pedal (for manual transmission) or pressing the "OK" button, with the "KK" function activated, the "KK" function will be deactivated while maintaining the set (fixed) the driver remembers the speed of the car. The indicator on the checkpoint should turn on
yellow color.
If the activated "CC" function cannot maintain the set vehicle speed (for example, on descents, ascents or when the driver has incorrectly selected a manual transmission gear), the function will be deactivated, with the set vehicle speed saved in memory.
Subsequent activation of the "CC" function is possible by pressing the "OK" button, in which case the system is activated with the restoration of the saved value of the vehicle's speed from memory, and the indicator on the control panel is turned on
green color.
The function can also be activated by re-setting the set speed by pressing the "Set+" or "Set-" keys (see above).
5. Malfunctions
If a malfunction of the steering column switch occurs, the "CC" function is switched off, all function indicators on the gearbox are switched off, and subsequent pressings of the "Menu" button are ignored.
If a malfunction of the ECM occurs that does not allow the normal operation of the "CC" function, the function is switched off, all function indicators on the gearbox are switched off for 2 seconds, after which the "CC and OS" function selection mode is switched on on the additional LCD of the gearbox - the indicator
. Exit from this mode is possible by long (more than 1 second) by pressing the "Menu" button.