1. Turn the function on/off
The "OS" function is activated by pressing the "SL" key. The indicator on the control panel should turn on
yellow, indicating the selection (switching on) of the function and indication on the LCD of the set threshold (limit) of the vehicle speed. Pressing the "SL" key again should turn it off, and the indicator on the control panel should turn off and indication on the LCD of the set threshold (limit) of the vehicle speed. When pressing the "SL" button when the "OC" function is activated, it should be deactivated and switched off, while the saved value of the set threshold (limit) of the vehicle's speed should be saved in memory, regardless of whether the ignition switch was turned off or not. The indicator on the checkpoint should go off and indication on the LCD of the set threshold (limit) of the vehicle speed. When pressing the "CC" key when the "OC" function is on, the "OC" function should be turned off (the corresponding indicator on the control panel should turn off and indication on the LCD of the set threshold (limit) of the vehicle speed) and activation of the CC function (the corresponding indicator should turn on on the CP 
). When pressing the "CC" button when the "OC" function is activated, the "OC" function should be deactivated and switched off, while the saved value of the set threshold (limit) of the vehicle's speed should be saved in memory (the corresponding indicator on the checkpoint should turn off and indication on the LCD of the set threshold (limit) of the vehicle speed) and activation of the "CC" function (the corresponding indicator should turn on on the CP ).
2. Installation, activation of the function
When the "OS" function is enabled, by pressing the "Set+" (or "Set-") key, you can set the current vehicle speed as the maximum, i.e. activate the system if the vehicle speed is less than or equal to 150 km/h.
At the same time, a green indicator will turn on on the control panel, indicating that the function is activated, and the LCD will display the set speed limit of the vehicle.
Attention! If the current vehicle speed is less than or equal to 30 km/h, then pressing the "Set+" or "Set-" keys will set the vehicle speed limit to 30 km/h.
3. Changing the set threshold (limit) of the vehicle speed with the "OS" function activated
Pressing the "Set+" key once will cause the vehicle speed limit to increase by 1 km/h. The LCD will display an updated indication of the set speed limit of the vehicle. Pressing the "Set-" button once will decrease the set vehicle speed limit by 1 km/h. The LCD will display an updated indication of the set vehicle speed limit.
Long press (more than 0.5 seconds) the "Set+" key will increase the set speed limit of the vehicle by 10 km/h. The LCD will display an updated indication of the set speed limit of the vehicle.
Long press (more than 0.5 seconds) "Set-" key will cause the set speed limit of the vehicle to be reduced by 10 km/h. The LCD will display an updated indication of the set speed limit of the vehicle.
4. Resumption, deactivation of the function
When the "OS" function is enabled, activation is possible by pressing the "OK" button. In this case, the system is activated with the restoration of the saved value of the set speed limit of the vehicle.
If the accelerator pedal is depressed more than 80% of its travel when the vehicle reaches the set speed limit, the function will be deactivated. At the same time, a flashing indicator will turn on at the checkpoint
yellow and a warning sound will be generated.
The subsequent activation of the "OS" function will occur automatically when the vehicle speed decreases to the previously set limit.
When you press the "SL" key, when the "CC" function is enabled, the CC function will be turned off (the alarm will turn off on the gearbox
) and enabling the OS function (the indicator on the control panel will turn on yellow, and the LCD will display the set speed limit of the vehicle).
Pressing the "SL" button when the "OS" function is on will turn the function off and the stored value of the set vehicle speed limit will be saved in memory. The indicator on the checkpoint will go off
, and the LCD display of the set vehicle speed limit will turn off.
When you press the "CC" key when the "OC" function is on, the "OC" function will be turned off (the indicator on the control panel will turn off#img!#, and the LCD will turn off the indication of the set speed limit of the vehicle) and the activation of the "CC" function (the indicator on the control panel will turn on
yellow). When you press the "CC" button when the "OC" function is activated, the "OC" function will be deactivated and switched off. In this case, the saved value of the set speed limit of the vehicle will be saved in memory, the indicator on the checkpoint will turn off green, and the LCD display of the set speed limit of the vehicle will turn off. Then the "CC" function will be activated (the indicator on the control panel will turn on yellow color).
5. Malfunctions
If a malfunction of the steering column switch occurs, the "OS" function is switched off, all function indicators on the gearbox are switched off, and subsequent pressings of the "Menu" button are ignored.
If a malfunction of the ECM occurs that does not allow the normal operation of the "OS" function, the function is switched off, all function indicators on the gearbox are switched off for 2 seconds, after which the indicator on the LCD of the gearbox is switched on
. Exit from this mode is possible by long (more than 1 second) by pressing the "Menu" button.