Warning: When removing the pointer, do not apply excessive force to avoid breaking the pointer's spring clip, which is made of plastic.
2. Carefully move the side turn signal together with the sealing gasket forward by 23 mm, move the rear part of the signal away from the wing (at the same time we disengage the bracket-shaped protrusion of the indicator).
Note: If it is necessary to remove the indicator, disconnect the wiring block from the lamp socket.
3. Move the indicator away from the wing and remove the socket together with the bulb from the indicator housing.
4. Remove the faulty lamp from the socket.
5. Install the new lamp and insert the socket with the lamp into the turn signal.
6. Place the bracket-shaped protrusion of the indicator behind the edge of the hole. While pressing the rear part of the indicator to the wing, press on its front part until the lock snaps into place.