Cleaning the drainage holes of the body (Priora 2170)

During operation, moisture accumulates in the cavities of thresholds and doors, causing corrosion. This moisture is removed through drainage holes located at the bottom of the thresholds and doors. Drainage holes are constantly becoming clogged with dirt, so annual cleaning is recommended. When operating the vehicle on country roads, perform this operation more often.

Note: Clean the drain holes before washing your vehicle.

You will need a screwdriver or wire.

Note: Work from underneath the vehicle. For clarity, the work was carried out on a vehicle installed on a lift.

This is how the holes are cleaned using a screwdriver of a suitable size.

Drainage holes are located in the following places.



Doors - eight openings in the front…





…and six holes in the rear doors.



(Article copied from a web page: «LADAMAN.ru»)

Thresholds - six holes on each side.

Note: The drainage holes are located symmetrically relative to the longitudinal axis of the vehicle.