Attention! Before leaving the garage or parking place, check the technical condition of the car.
To do this:
- 1. Check and adjust the air pressure in your tires to the correct level (see table 3).
- 2. Check the oil level in the engine crankcase and top it up to normal if necessary.
- 3. Check the levels of coolant, brake and washer fluids and top them up if necessary.
- 4. Check the condition of the external lighting fixtures and their cleanliness.
- 5. Check the operation of the windshield wiper system.
- 6. Check that mirrors, seats and seat belts are installed correctly.
- 7. Check the serviceability of the working brake system (no brake pedal failure) and parking brake system (locking the parking brake lever).
The presence of traces of oils and operating fluids under the vehicle indicates that its components and assemblies are not tight. In this case, it is necessary to contact a certified PSSS to identify and eliminate the causes of their occurrence.
Attention! Without delay, eliminate any detected faults on certified PSSS.
Driver's seating behind the wheel
Warning! Safe driving technique depends largely on the correct driver's seating position. Correct seating position - the driver leans firmly enough against the back of the seat, the legs are not fully extended when the pedals are fully moved, and both arms, slightly bent at the elbows, hold the upper part of the steering wheel. The body position should be stable, but not tense - this prevents rapid fatigue.