Removing
1. Remove the alternator drive belt («Alternator drive belt - replacement»).
2. Remove the wire ends from the contact bolt.
3. Disconnect the wires from the generator (see «Voltage regulator - replacement»).
4. Using a 13 mm socket wrench, unscrew the bolt nut of the upper mounting of the generator. Using a 17 mm socket wrench, unscrew the bolt of the lower mounting of the generator.
5. Remove the bolts from the generator bracket and remove the generator.
6. In order not to lose, we remove the nut and bolt sleeve from the generator bracket.
Installation
Install the generator in reverse order.