Checking the battery (XRAY 1)

Check the reliability of the battery (AKB) fastening and terminals, open circuit voltage at the battery terminals (figure 11). The voltage at the battery terminals must be at least 12.6 V. If the voltage at the terminals is lower than the permissible value, the battery must be removed from the vehicle and charged in accordance with the requirements of TI 3100.25100.13069.

Figure 11 - Checking the battery

Warning! Do not remove the terminals from the battery terminals when the ignition is on, as this may cause errors in the operation of the ECM or lead to failures of electrical equipment.

(Article based on data from the website: «LADAMAN.ru»)

This article is available at russian, bulgarian, belarusian, ukrainian, serbian, croatian, romanian, polish, slovak, hungarian

This article has been reviewed: Daniil Markelov

◀ Previous

Lada X-Ray 1: Daily care

Next ▶

Checking connections, hoses, electrical connectors
Car storage
Outdoor lighting and external light signaling devices
Towing hitch (TCU)
Transporting items in the luggage compartment

Checking the condition of the auxiliary drive belt
Checking the functionality of vehicle equipment
Checking the functionality of the safe parking system (SPS)
Checking the integrity of the noise-proofing mastic coating
Checking the exhaust system for leaks

More articles with information from manuals for Lada:

• The battery is not charging Lada Kalina Hatchback (2004-2013, VAZ-1119)
• Rechargeable battery Lada Granta 1 (2011-2023, VAZ-2190)
• Checking the electrolyte level in the battery Lada Priora 1 (2007-2018, VAZ-2170)
• Replacing the battery in the remote control Lada Vesta 1 (2015-2023, VAZ-2180)
• Starting the engine from another battery Lada Largus 1 (2012-2023)

Link to this article in various formats

TEXTHTMLBB Code