Removal
1. Remove the engine splash guard ("Checking the technical condition of the engine").
2. Drain the oil from the engine ("Engine Oil and Oil Filter - Replacement").
3. Using a 10 mm socket wrench, unscrew the three bolts and remove the lower cover of the clutch housing.
4. Using a 10 mm wrench, unscrew the 16 bolts securing the engine oil pan.
Note: There are washers under the heads of the oil pan bolts - do not lose them.
5. Remove the pan and pan gasket.
Installation
We install the tray in the reverse order, replacing the damaged or lost elasticity gasket.
To evenly distribute the gasket, tighten the oil pan mounting bolts in the direction from the middle to the edges.