
Drain the used oil through the hole closed with plug 2.
Attention! The gearbox oil level dipstick must be installed until the flange on the dipstick handle stops in the inspection hole boss, without tilting the dipstick.
In the variant version, when the car is equipped with a manual transmission with a cable control drive, the oil level should be at the lower edge of the inspection hole 1 (figure 45b). Topping up the oil (see appendix 1) pass through the inspection hole in small portions.

Attention! In a manual transmission with a cable control drive, use only semi-synthetic oil Tatneft TM-4-12 SAE 75W-85 GL-4.
Drain the used oil through the hole closed with plug 2.
