4.1 Listening to audio files
4.1.1 You can switch to the audio file listening mode in the following ways:
- connect SD card;
- connect USB drive;
- press the AUDIO button (figure 2, pos. 20).
Note: Switching to the "Audio" mode when connecting external storage devices will not occur if the receiver is in the "receiving a phone call" mode.
4.1.2 The conditions for correct connection are given in Appendix 5b.
4.1.3 In this mode, in the top line (figure 2, pos. 3) displays the folder or track number and the playing time of the current track. At the bottom - track name → file name → folder name → artist name (select by short pressing the DISP button (pos. 9). If the displayed information is longer than 16 characters, the line will scroll cyclically.
Attention! The radio receiver supports playback of MP3 and WMA audio files.
4.2 Start/stop playback
4.2.1 Playback can be started in one of the following ways:
- installing SD/USB drive with music files;
- by pressing button 1 "▶ |" (figure 2, pos. 21).
Note: Playback will stop automatically when you press the MUTE (figure 2, pos. 3) or an incoming phone call and automatically continues after pressing the MUTE button again, or turning the encoder knob (figure 2, pos. 6), or the end of a telephone conversation.
4.3 Output of additional information (if available). MP3 files
4.3.1 Press the 2 TAG button (figure 2, pos.19) - additional information on the current file will appear on the display (artist name, album title or song title).
4.3.2 To stop displaying this information, press the 2 TAG button again (figure 2, pos. 19).
4.4 Controlling Playback Modes
4.4.1 When you simultaneously insert a USB and SD drive, both icons are lit (figure 3, pos. 5 and 6), while the icon of the media from which playback is currently taking place will flash. The source is selected using the AUDIO button (figure 2, pos. 20).
4.4.2 To turn the track repeat playback mode on or off, press the 4 RPT button (pos. 17) briefly. The RPT indicator (figure 3, pos. 10), and the TRACK icon (figure 3, pos. 2) will blink.
4.4.3 To turn the folder repeat playback mode on or off, press and hold button 4 RPT (pos. 17) until the message "REPEAT FOLDER" appears. In this case, the RPT icon (figure 3, pos. 10) will be lit, and the FOLDER indicator (figure 3, pos. 1) - blink.
4.4.4 The random folder playback mode is switched on or off by briefly pressing the 3 RDM button (pos. 18). The RDM icon (figure 3, pos. 9), and the display shows a short message "RDM FOLDER" in the bottom line. During random playback in the current directory, the RDM indicator is displayed (figure 3, pos. 9), and the FOLDER icon (figure 3, pos. 1) will blink.
4.4.5 To turn on or off the random playback mode for the entire media, press and hold the 3 RDM button (pos. 18). The RDM icon (figure 3, pos. 9), and on the display in the bottom line there is a short message "RDM ALL".
4.4.6 Using buttons 6 F- or 5 F+ (pos. 14 or 16) quickly switches to listening to the contents of the previous or next folders, respectively. Select a specific folder (with title view) can be done by turning the encoder knob after briefly pressing the SCAN button. Select a specific track (with title view) you can do this by turning the encoder knob after pressing and holding the SCAN button.
Original text can be found on the website: Ladaman.ru
4.5 MUTE mode
4.5.1 When you press the MUTE button (figure 2, pos. 3) the corresponding icon is displayed at the bottom of the display (figure 3, pos. 14).
4.5.2 To turn the sound back on, press the MUTE button again (figure 2, pos. 3) or increase the volume using the encoder.