Removal
1. Prepare the car for work ("Preparing the car for maintenance and repair").
2. Using a Phillips screwdriver, unscrew the two screws on the left and right sides of the floor tunnel front lining.
3. Using a Phillips screwdriver, unscrew the three screws securing the parking brake lever trim.
4. Remove the lever trim.
5. Using a socket wrench, unscrew the two bolts securing the parking brake lever.
6. Move the parking brake lever to the side and use a Phillips screwdriver to unscrew the rear mounting screw for the floor tunnel trim.
7. Lift the floor tunnel trim above the gear shift lever and remove it.
Installation
We install the cladding in the reverse order.