Removal
1. Prepare the car for work and disconnect the terminal from the negative terminal of the battery ("Preparing the car for maintenance and repair").
Note: If the car has a radio (or other audio system head unit) we remove it in accordance with the instructions for its installation. Otherwise, we extract and remove the storage box...
...and disconnect two pads from it.
2. Remove the air flow control handles...
...and an air temperature regulator.
3. Remove the air recirculation flap control lever handle.
4. Pulling towards yourself, overcoming the resistance of the holders, remove the trim from the instrument panel.
5. Move the cover away from the instrument panel to the length of the wires. We disconnect the wire blocks from the switches and panel backlight lamps.
6. If necessary, remove the switch covers from the holes.
Installation
We install the overlay in the reverse order.