Disassembling the engine cylinder head (XRAY 1)

Install the cylinder head on the fixture (device 67.7823-9567 for valve decompression and dehydration).

Remove the valve lifters from the cylinder head, marking their position relative to the cylinder head in any way that does not cause damage to the parts.

Compress the springs of one row of valves and remove the crackers (tweezers).

Remove the valve plates, springs and spring support washers.

Repeat the operations for the second row of valves.

Remove the cylinder head from the fixture and remove the valves.

Press out the oil seals (pliers for removing valve stem seals).

Remove the exhaust manifold mounting studs (tORX E8 replaceable head, ratchet).

Remove the cylinder head cover centering pins from the cylinder head (pliers).

Unscrew the phase regulator oil filter from the cylinder head (replaceable head 8 for internal hexagon, ratchet and extension).

Original text is available on the website Ladaman.ru