Emergency light signaling (XRAY 1)

The hazard warning light button is located in the switch block on the instrument panel (figure 1.12). To turn on the hazard warning lights, press the button in the switch block.

Pressing the button again turns off the alarm.



Turning on the hazard warning lights is necessary in emergency situations, for example:

• if a traffic accident occurs;
• if the driver had to make a forced stop in a prohibited place due to a technical malfunction of the vehicle;
• if a driver is blinded by an oncoming vehicle at night;
• in case of necessary towing of the vehicle, carried out using a mechanical vehicle.

(Information taken from the website: «LadaMan»)