Replacement
1. Disconnect the rod from the lock switch (see «Switch (larva) lock - replacement»).
2. Using an 8 mm socket wrench, unscrew the two bolts securing the lock.
3. Remove the lock from the door...
... and by pressing the latch, disconnect the block of wires.
4. Install the lock in reverse order.
Adjustment
1. Using a Phillips impact screwdriver, loosen the two screws securing the lock retainer.
2. By moving the latch to the right or left, we make sure that its lug enters the slot of the lock in the center (this can be seen from the passenger compartment by folding the back of the rear seat).
3. At the end of the adjustment, tighten the fixing screws of the latch.