Figure 2.1. Adjusting the position of the front seat
Figure 2.2. Adjusting the seat back angle
To move the seat forward or backward, pull the lever up and slide the seat to the desired position.
Release the lever and make sure the seat is locked in place.
Warning! For safety reasons, do not adjust the driver's seat while driving. This may result in loss of control of the vehicle.
To change the angle of the seatback, lean forward and lift the seatback angle adjustment lever up. Lean back to set the seat back to the desired position and release the adjustment lever.
Make sure the seat back is locked in its new position.
The height of the driver's seat is adjusted using a lever located on the outside of the seat.
Figure 2.3. Seat height adjustment
To lower the seat, press the lever down several times.
To raise the seat, pull the lever up several times.
Warning: To avoid reducing the effectiveness of the seat belts, it is recommended not to recline the seat backs too far back.
Make sure the seat backs are securely fastened.
for more detailed information on the correct adjustment of the front seats from a passive safety point of view, see the subsection "Airbag system".
Figure 2.4. Front seat heating switch (with fixed positions)
In the optional version, the front seats are equipped with electric heaters.
The heaters only operate when the ignition is on.
Use seat heaters only when the engine is running.
Check the position of the switches (especially the passenger seat when there is no passenger) to avoid unnecessary operation of heaters (Figure 2.5): When the engine is restarted, the heaters are automatically switched on if the switches were left in the "B" ("On") position.
Figure 2.5. Position of the front seat heating switch: "A" – Off. "B" – On.
(Main material on the website www.LadaMan.ru)