You will need: socket wrenches (heads) «at 13», TORX E10, screwdriver.
1. Move the seat all the way forward, use a screwdriver to remove the ends of the torsion bars from the brackets and remove both torsion bars.
2. Move the seat all the way back and unscrew it with the key «at 13» two nuts for fastening the brackets.
3. Remove both brackets from the studs.
4. Using a TORX E10 wrench, remove the two bolts from the front of the slide to the floor.
5. Slide the seat all the way forward and use a TORX E10 key to unscrew the three bolts for the rear fastening of the slide.
6. Remove the seat from the passenger compartment.
7. Install the seats in the reverse order of removal. When doing this, keep in mind that the upper ends of the torsion bars (1 - right torsion bar, 2 - left torsion bar) mirror curved.
8. It is more convenient to install the torsion bars as follows: move the seat back, first insert the lower end of the right 1, and then the lower end of the left 2 torsion bars into the holes of the brackets and, moving the seat forward, insert the upper ends of the torsion bars into the hooks on the seat base pillar.