Removal
1. Prepare the car for work ("Preparing the car for maintenance and repair").
2. Remove the front wheel ("Wheel - replacement").
3. Using a TORX T20 key, unscrew the three screws securing the front wing mudguard and remove the mudguard.
4. Using a screwdriver, unscrew the seven screws securing the front part of the mudguard (five screws 1 for a Phillips screwdriver and two screws 2 for an 8 mm key).
5. Remove the front part of the fender liner.
6. Using an 8 mm socket wrench, unscrew the three screws securing the rear part of the mudguard and remove it.
Article copied from this portal: ladaman.ru
Installation
We install the mudguard in the reverse order.