Note. front and rear door audio speaker part numbers see here.
Removing
Place the car on the workplace, brake with the parking brake, turn off the ignition. Raise the hood, disconnect the wire terminal "masses" from battery (wrench "on 10").
Pry off the protective lining with a spudger or similar tool (lattice) dynamics
And overcoming the force of the holders, remove the facing of the front speaker.
Loosen the four screws 3, Figure 17-1, fastening the front speaker 2 to the door panel (Phillips screwdriver).
Figure 17-1 - Front door speaker
1 - front door; 2 - front loudspeaker; 3 - loudspeaker fastening screw
Move the speaker away from the door as far as the wiring will allow.
Figure 17-2 - Removing the front door speaker:
1 - front door; 2 - block of the instrument panel wiring harness to the front speaker
Remove the front speaker 2 by disconnecting from it the block 2, Figure 17-2, of the instrument panel wiring harness.
Remove the rear speakers in the same way as the front ones.
Installation
Install the front and rear speakers in the reverse order of removal.