Removal
Place the vehicle in the work area, apply the parking brake, and turn off the ignition. Raise the hood, disconnect the ground wire terminal from the battery (10 mm spanner).
Remove the central trim 1, Figure 15-1, from the instrument panel, overcoming the force of the clamps.
Figure 15-1 - Removing the switches and controls on the instrument panel center console: 1 - central instrument panel trim; 2 - Left front door window lift switch; 3 - rear window heating switch; 4 - hazard warning switch; 5 - door lock switch; 6 - Right front door window lift switch
Figure 15-2 - Switch and control pads on the instrument panel center console: 1 - Wiring harness connector to the left front door window lift switch; 2 - Wiring harness connector to rear window heating switch; 3 - Wiring harness connector to the hazard warning light switch; 4 - Wiring harness connector to door lock switch; 5 - Wiring harness connector to the right front door window lift switch
Disconnect pads 1...5, Fig. 15-2, of the instrument panel wiring harness from the rear window heating switches, hazard warning lights, door locks, and right and left front door window lift switches by pressing the spring clips.
(The source is located on the website: LADAman)
Squeeze the latches to remove the switches and toggles from the central instrument panel trim.
Installation
Install switches and circuit breakers in the reverse order of removal.