Removal
Place the vehicle in the work area. Raise the hood, disconnect the ground wire terminal from the battery.
Remove the body partition.
Loosen the twenty-four screws 1, Figure 20-1, and the seven screws 2 securing the floor panels to the body base, remove the floor panels (replaceable head Torx T30, Torx T40, ratchet).
Figure 20-1 - Securing the cargo compartment floor: 1 - Torx T30 floor mounting screw; 2 - Torx T40 floor mounting screw
Installation
Install the removed parts in the reverse order of removal, while installing gaskets on the ends of the floor frame.
Full article on the website (www.Ladaman.ru)