Removal
Place the vehicle in the work area, apply the parking brake, turn off the ignition, raise the hood, and disconnect the ground wire terminal from the battery (10 mm spanner).
Figure 23-1 - Front Bumper Wiring Harness: 1 - Front bumper wiring harness
Remove the right and left mudguards from the front bumper.
Disconnect connector 3, Figure 19-6, of the instrument panel wiring harness from connector 1, Figure 23-1, of the front bumper wires.
Disconnect the front bumper wiring harness connectors from the right and left fog lights.
Remove the front bumper wiring harness.
Installation
Install the front bumper wiring harness in the reverse order of removal.