Using a marker, mark the position of the lower door lock relative to the inner door panel. Similarly, we mark the position of the upper door lock.
Using a Torx T-30 key, unscrew the two screws securing the lower lock to the inner door panel.
We move the lower lock away from the inner door panel and use thin-nosed pliers to remove the tip of the lock drive cable sheath from the groove at its base.
We align the lower lock drive cable with the groove in the lock lever...
...we remove the cable tip from the hole in the lever...
...and remove the lower door lock.
We carry out similar operations when removing the upper door lock. To remove the lock drive, remove the trim of the left luggage compartment door.
Remove the glass cleaner from the left luggage compartment door.
Using a Torx T-30 key, unscrew the three screws securing the lock drive to the inner door panel.
By moving the lock drive to the technological opening in the inner door panel and pressing the latch, we disconnect the wiring harness block of the electric door lock drive.
We remove the door lock drive together with the cables of the upper and lower locks through a technological hole in the inner door panel.
Left luggage compartment door lock drive with cables: 1 - upper lock drive cable; 2 - lower door lock drive cable; 3 - electric drive for locking.
If it is necessary to replace the lower lock drive cable...
...with fine-nosed pliers.
...we remove the cable from the groove of the door lock drive base...
...and, having aligned the cable with the groove of the lever, we remove the end of the cable from the lever. Similarly, we disconnect the upper door lock drive cable.
We install the locks and the drive of the left luggage compartment door in the reverse order.